2 Command System RIGOL
DS2000E Programming Guide
:LAN:INITiate
Syntax
:LAN:INITiate
Description
Initialize the network parameters. Before using this command, make sure that the oscilloscope has been
connected to the network correctly.
:LAN:IPADdress
Syntax
:LAN:IPADdress <string>
:LAN:IPADdress?
Description
Set or query the IP address of the instrument.
Parameter
Name Type Range Default
<string> ASCII string Refer to Explanation --
Explanation
The format of <string> is nnn,nnn,nnn,nnn. Wherein, the range of the first nnn is from 1 to 223
(except 127), and the ranges of the other three nnn are from 0 to 255.
When you use this command, the IP configuration mode should be Static IP mode (refer to
the
:LAN:MANual command), and DHCP and Auto IP are disabled.
Return Format
The query returns the current IP address in string.
To Next Page
Loading...
