Rigol DS2000E Series Programming Guide

RIGOL 2 Command System
2-84 DS2000E Programming Guide
:CURSor:MANual
 :CURSor:MANual:TYPE
 :CURSor:MANual:SOURce
 :CURSor:MANual:TUNit
 :CURSor:MANual:VUNit
 :CURSor:MANual:CAX
 :CURSor:MANual:CBX
 :CURSor:MANual:CAY
 :CURSor:MANual:CBY
 :CURSor:MANual:AXValue?
 :CURSor:MANual:BXValue?
 :CURSor:MANual:AYValue?
 :CURSor:MANual:BYValue?
 :CURSor:MANual:XDELta?
 :CURSor:MANual:IXDelta?
 :CURSor:MANual:YDELta?
:CURSor:MANual:TYPE
Syntax
:CURSor:MANual:TYPE <type>
:CURSor:MANual:TYPE?
Description
Set or query the cursor type of manual measurement with cursor.
Parameter
Name Type Range Default
<type> Discrete {TIME|AMPLitude} TIME
Explanation
 TIME: X cursors which are usually used to measure time parameters.
 AMPLitude: Y cursors which are usually used to measure voltage parameters.
Return Format
The query returns TIME or AMPL.

Rigol DS2000E Series Specifications

General

Brand	Rigol
Model	DS2000E Series
Category	Test Equipment
Language	English