Rigol DS2000E Series Programming Guide

RIGOL 2 Command System
2-158 DS2000E Programming Guide
:MEASure:FTIMe
Syntax 1
:MEASure:FTIMe <chan>
Description 1
Enable the fall time measurement function of the specified channel.
Syntax 2
:MEASure:FTIMe? <chan>
Description 2
Enable the fall time measurement function of the specified channel and return the measurement result
(the unit is s).
Parameter
Name Type Range Default
<chan> Discrete {CHANnel1|CHANnel2|MATH} --
Return Format
The query returns the fall time measurement result in scientific notation. When the measurement result is
invalid, the query returns 9.9e37.
Example
:MEASure:FTIMe CHANnel1
:MEASure:FTIMe? CHANnel1
You can use the following commands to enable the fall time measurement function of the specified
channel and the statistic function of the measurement results as well as query the statistic maximum
value, minimum value, current value, average value, and standard deviation of the fall time measurement
results.
 :MEASure:FTIMe:SMAXimum
 :MEASure:FTIMe:SMINimum
 :MEASure:FTIMe:SCURrent
 :MEASure:FTIMe:SAVerage
 :MEASure:FTIMe:SDEViation

Rigol DS2000E Series Specifications

General

Brand	Rigol
Model	DS2000E Series
Category	Test Equipment
Language	English