Rigol DS2000E Series Programming Guide

2 Command System RIGOL
DS2000E Programming Guide
2-151
:MEASure:F2RDelay:SMAXimum
:MEASure:F2RDelay:SMINimum
:MEASure:F2RDelay:SCURrent
:MEASure:F2RDelay:SAVerage
:MEASure:F2RDelay:SDEViation
Syntax 1
:MEASure:F2RDelay:SMAXimum <chanA>,<chanB>
:MEASure:F2RDelay:SMINimum <chanA>,<chanB>
:MEASure:F2RDelay:SCURrent <chanA>,<chanB>
:MEASure:F2RDelay:SAVerage <chanA>,<chanB>
:MEASure:F2RDelay:SDEViation <chanA>,<chanB>
Description 1
Enable the delay (falling edge-rising edge) measurement function between the two specified channels
and the statistic function of the measurement results.
Syntax 2
:MEASure:F2RDelay:SMAXimum? <chanA>,<chanB>
:MEASure:F2RDelay:SMINimum? <chanA>,<chanB>
:MEASure:F2RDelay:SCURrent? <chanA>,<chanB>
:MEASure:F2RDelay:SAVerage? <chanA>,<chanB>
:MEASure:F2RDelay:SDEViation? <chanA>,<chanB>
Description 2
Query the statistic maximum value (SMAXimum), minimum value (SMINimum), current value (SCURrent),
average value (SAVerage), or standard deviation (SDEViation) of the delay (falling edge-rising edge)
measurement results when the delay (falling edge-falling edge) measurement function between the two
specified channels and the statistic function of the measurement results are enabled.
Parameter
Name Type Range Default
<chanA> Discrete {CHANnel1|CHANnel2} --
<chanB> Discrete {CHANnel1|CHANnel2} --
Return Format
The query returns the statistic maximum value, minimum value, current value, average value or standard
deviation of the delay (falling edge- rising edge) measurement results in scientific notation. When the
measurement results are invalid, the query returns 9.9e37.

Rigol DS2000E Series Specifications

General

Brand	Rigol
Model	DS2000E Series
Category	Test Equipment
Language	English