Rigol DS2000E Series Programming Guide

2 Command System RIGOL
DS2000E Programming Guide
2-189
:MEASure:VBASe:SMAXimum
:MEASure:VBASe:SMINimum
:MEASure:VBASe:SCURrent
:MEASure:VBASe:SAVerage
:MEASure:VBASe:SDEViation
Syntax 1
:MEASure:VBASe:SMAXimum <chan>
:MEASure:VBASe:SMINimum <chan>
:MEASure:VBASe:SCURrent <chan>
:MEASure:VBASe:SAVerage <chan>
:MEASure:VBASe:SDEViation <chan>
Description 1
Enable the amplitude base value measurement function of the specified channel and the statistic function
of the measurement results.
Syntax 2
:MEASure:VAVG:SMAXimum? <chan>
:MEASure:VAVG:SMINimum? <chan>
:MEASure:VAVG:SCURrent? <chan>
:MEASure:VAVG:SAVerage? <chan>
:MEASure:VAVG:SDEViation? <chan>
Description 2
Query the statistic maximum value (SMAXimum), minimum value (SMINimum), current value (SCURrent),
average value (SAVerage), or standard deviation (SDEViation) of the amplitude base value measurement
results when the amplitude base value measurement function of the specified channel and the statistic
function of the measurement results are enabled.
Parameter
Name Type Range Default
<chan> Discrete {CHANnel1|CHANnel2|MATH} --
Explanation
The unit is determined by the unit selected for the signal source channel (refer to
the
:CHANnel<n>:UNITs command).
Return Format
The query returns the statistic maximum value, minimum value, current value, average value, or standard
deviation of the amplitude base value measurement results in scientific notation. When the measurement
results are invalid, the query returns 9.9e37.

Rigol DS2000E Series Specifications

General

Brand	Rigol
Model	DS2000E Series
Category	Test Equipment
Language	English