Rigol DS2000E Series

2 Command System RIGOL
DS2000E Programming Guide
2-229
 TMENu: press MENU in the trigger control area.
 TFORce: press FORCE in the trigger control area.
 TMODe: press MODE in the trigger control area.
 RSTop: press RUN/STOP.
 QPRInt: press the print key.
 SRECord|ERECord: start or stop recording waveforms.
 PPAuse: start, pause or resume the playback of the recorded waveform (only valid when waveforms
are recorded).
 FFP10|FFP20|FFP30|FFP40|FFP50|FFP60|FFP70: rotate the outer layer of the navigation knob
clockwise. The number in the paramerter denotes the rotation step. Larger number corresponds to
faster rotating speed.
 FFN10|FFN20|FFN30|FFN40|FFN50|FFN60|FFN70: rotate the outer layer of the navigation knob
counterclockwise. The number in the paramerter denotes the rotation step. Larger number
corresponds to faster rotating speed.