Rigol DS2000E Series Programming Guide

RIGOL 2 Command System
2-280 DS2000E Programming Guide
:TRIGger:RS232:BUSer
Syntax
:TRIGger:RS232:BUSer <user baud>
:TRIGger:RS232:BUSer?
Description
Set or query the user-defined baud rate of RS232 trigger. The unit is bps.
Parameter
Name Type Range Default
<user baud> Integer 110 to 20000000 9600
Return Format
The query returns the user-defined baud rate of RS232 trigger in integer.
:TRIGger:RS232:DATA
Syntax
:TRIGger:RS232:DATA <data>
:TRIGger:RS232:DATA?
Description
Set or query the data value of RS232 trigger when the trigger condition is Data.
Parameter
Name Type Range Default
<data> Integer 0 to 2
n
-1 70
Note: In the expression 2
n
-1, n is the current data bits (refer to the :TRIGger:RS232:WIDTh command).
Explanation
To set the trigger condition of RS232 trigger, refer to the
:TRIGger:RS232:WHEN command.
Return Format
The query returns the data value of RS232 trigger when the trigger condition is Data in integer.

Rigol DS2000E Series Specifications

General

Brand	Rigol
Model	DS2000E Series
Category	Test Equipment
Language	English