Riso 9150 - Page 119

2-41
Copying Functions
2
ComColor Series User’s Guide 09
● Changing the program settings
Change the number of copies and sets for the
program.
1 Display the [Program (1)] screen.
Follow Steps 1 and 2 in "Configuring the
Program".
2 Press [Save/Call].
The [Program list] screen is displayed.
3 Select the program with the
settings to change.
4 Press [Retrieve].
The [Program (1)] screen is displayed.
5 Enter the number of copies and
sets.
• See "Configuring the Program" (p. 2-38) for
details on how to enter the number of copies
and sets.
6 Press [Overwrite].
The changes are saved.
• To only change the program, press [Cancel].
• To copy, press [Close] and then press [Next] on
the [Program (1)] screen.
● Deleting a Program
1 Display the [Program (1)] screen.
Follow Steps 1 and 2 in "Configuring the
Program".
2 Press [Save/Call].
The [Program list] screen is displayed.
3 Select the program to delete.
You can also select multiple programs.
4 Press [Delete].
The message "Selected setting will be deleted.
Are you sure?" appears.
5 Press [Yes].
The program is deleted and the [Program list]
screen is displayed.
6 Press [Close].
The [Program (1)] screen is displayed.
7 Press [Cancel].
8