Roche Diagnostics
Operator’s Manual · Version 1.0 C-31
URISYS 2400 5 Daily operation
Analysis and documentation of results
If “Reflectance” has been selected, reflectance values for each measured
position of the test strip with an indication of the wavelength used (B = blue
470 nm, G = green 555 nm, O = orange 620 nm) are printed. The SG value is
the result value; the clarity (CLA) value is the percent value of light
transmission. The print order of reflectance values is fixed and cannot be
changed.
URISYS 2400 ANALYTICAL REPORT 2001.04.02 10:36
S.No.C1009 RACK 30001-1 OP2 2001.04.02 10:34
CONTROL NAME LIQUICHECK L-1
CONTROL LOT No. 6108101
T/S CASSETTE LOT No. 28782701
T/S CASSETTE ON-BOARD DATE/TIME 2001.04.02 10:28
SG 1.002 PH 7 LEU NEG
NIT NEG PRO NEG GLU NORM
KET NEG UBG NORM BIL NEG
ERY NEG COL AMBER CLA CLEAR
S.No.C1009 RACK 30001-1 OP2 2001.04.02 10:34
CONTROL NAME LIQUICHECK L-1
CONTROL LOT No. 6108101
T/S CASSETTE LOT No. 28782701
T/S CASSETTE ON-BOARD DATE/TIME 2001.04.02 10:28
COM-B 56.1 COM-G 54.3 COM-O 52.4 ERY-G 59.7
ERY-O 63.5 LEU-G 62.3 NIT-G 44.4 KET-G 46.5
GLU-G 60.9 PRO-G 54.5 UBG-G 52.5 BIL-G 53.7
PH -G 28.9 PH -O 31.1 SG 1.002 CLA 99.7
Figure C-10 Printout of control samples
To Next Page
Loading...
