Rockwell Automation Publication 2198-UM001M-EN-P - November 2022 197
Appendix B Update the Drive Firmware
5. Expand your Ethernet node, Logix backplane, and EtherNet/IP™ network
module.
6. Select the servo drive to update.
7. Click OK.
The Firmware Revision dialog box appears.
8. Select the firmware revision to update.
9. Click Next.
The Summary dialog box appears.
10. Confirm the drive catalog number and firmware revision.
11. Click Finish.
This ControlFLASH warning dialog box appears.
To Next Page
Loading...
