Rohde & Schwarz R&S RTB2004 - FFT Display

Applications
R&S
®
RTB2000
119User Manual 1333.1611.02 ─ 04
8.2.1 FFT Display
When you activate FFT display, two windows are displayed: the signal vs. time at the
top, the result of the FFT analysis at the bottom. In addition, FFT-specific parameters
can be set in the FFT shortcuts.
1
= Enable FFT
2 = Signal vs. time display
3 = FFT shortcuts
4 = Result of the FFT analysis
5 = Start frequency
6 = Stop frequency
7 = Center frequency
8 = Span
FFT Analysis