General Instrument Setup
R&S
®
RTB2000
152User Manual 1333.1611.02 ─ 04
10.8.1 Activating Options
Consult your sales representative and provide the material number, serial number, and
the device ID of your instrument to get a license key. You find this information in
"Setup" menu > "Device Information".
The license key is provided in written form or in a file. Unregistered licenses must be
registered in the R&S License Manager before they can be activated on the instru-
ment.
1. If you received the option key in a file, save the file to a USB flash drive.
2. Connect the drive to the R&S RTB2000.
3. Tap the "Menu" icon in the lower right corner of the screen.
4. Scroll down the menu. Tap "Setup".
5. Select "Options".
6. If you received a key in written form, tap "Input option key manually". Enter the key.
If you received a key in digital form as a file, tap "Read option key from file". Select
path /USB_FRONT and the option key file.
7. If you want to activate several options, repeat step 5 for each option.
8. Restart the instrument.
10.9 Updating the Firmware
Your instrument is delivered with the latest firmware version. Firmware updates are
provided on the Internet at www.rohde-schwarz.com/firmware/rtb2000. Along with the
firmware file, you find the Release Notes describing the improvements and modifica-
tions.
Make sure to update the firmware if a new version is available.
1. Download the firmware installation file RTB200*.fwu to a USB flash drive.
Updating the Firmware
To Next Page
Loading...
