Rohde & Schwarz R&S RTB2004 - XY-Waveforms

Remote Control Commands
R&S
®
RTB2000
334User Manual 1333.1611.02 ─ 04
SPECtrum:WAVeform:AVERage:DATA:YINCrement?
SPECtrum:WAVeform:MAXimum:DATA:YINCrement?
SPECtrum:WAVeform:MINimum:DATA:YINCrement?
SPECtrum:WAVeform:SPECtrum:DATA:YINCrement?
Returns the voltage value per bit of the indicated waveform.
Return values:
<Yincrement>
Usage: Query only
SPECtrum:WAVeform:AVERage:DATA:YORigin?
SPECtrum:WAVeform:MAXimum:DATA:YORigin?
SPECtrum:WAVeform:MINimum:DATA:YORigin?
SPECtrum:WAVeform:SPECtrum:DATA:YORigin?
Returns the vertical bit resolution of the indicated waveform.
Return values:
<Yorigin>
Usage: Query only
SPECtrum:WAVeform:AVERage:DATA:YRESolution?
SPECtrum:WAVeform:MAXimum:DATA:YRESolution?
SPECtrum:WAVeform:MINimum:DATA:YRESolution?
SPECtrum:WAVeform:SPECtrum:DATA:YRESolution?
Returns the vertical bit resolution of the indicated waveform.
Return values:
<Yresolution>
Usage: Query only
15.8.3 XY-Waveforms
DISPlay:MODE..............................................................................................................334
DISPlay:XY:XSOurce..................................................................................................... 335
DISPlay:XY:Y1Source.................................................................................................... 335
DISPlay:XY:Y2Source.................................................................................................... 335
DISPlay:MODE <Mode>
Sets the diagram mode.
Applications