Rohde & Schwarz R&S RTB2004 - History (Option R&S RTB2000-K15)

Remote Control Commands
R&S
®
RTB2000
296User Manual 1333.1611.02 ─ 04
Parameters:
<FileName> String parameter
Example:
EXPort:SEARch:NAME "/USB_FRONT/SEARCH/RESULT"
On first save, the search results are saved to RESULT.CSV, on
second save to RESULT01.CSV, the third to RESULT02.CSV ...
EXPort:SEARch:SAVE
Saves the search results to the path and file defined by EXPort:SEARch:NAME.
Usage: Setting only
15.6.5 History (Option R&S
RTB2000-K15)
● Segmented Memory..............................................................................................296
● Displaying History Segments................................................................................ 297
● Timestamps...........................................................................................................300
● Export of History Data...........................................................................................304
15.6.5.1 Segmented Memory
ACQuire:POINts:AUTomatic <AutoRecordLength>
Enables or disables the automatic record length. The instrument sets a value that fits
to the selected timebase.
If you set a specific value with ACQuire:POINts[:VALue], the automatic assign-
ment of a record length is turned off.
Parameters:
<AutoRecordLength> ON | OFF
Example:
ACQ:POIN:AUT ON
TIM:SCAL 1e-9
ACQ:POIN?;:SYST:ERR:ALL?
-> received 10000;0,"No error"
TIM:SCAL 5e-3
ACQ:POIN?;:SYST:ERR:ALL?
-> received 20000000;0,"No error"
ACQuire:POINts[:VALue]
Defines a record length value, the number of recorded waveform points in a segment.
The command turns ACQuire:POINts:AUTomatic OFF.
If ACQuire:POINts:AUTomatic is turned ON, the query ACQuire:POINts? returns
the automatically set record length.
Waveform Analysis