Rohde & Schwarz R&S RTB2004 - Waveform Data Export to File

Remote Control Commands
R&S
®
RTB2000
349User Manual 1333.1611.02 ─ 04
Example: See Chapter 15.2.1.4, "Reading Waveform Data in Unsigned
Integer Format", on page 243
Usage: Query only
CHANnel<m>:DATA:YRESolution?
CHANnel<m>:DATA:ENVelope:YRESolution?
CALCulate:QMATh:DATA:YRESolution?
MASK:DATA:YRESolution?
LOGic<p>:DATA:YRESolution?
DIGital<m>:DATA:YRESolution?
REFCurve<m>:DATA:YRESolution?
Return the vertical bit resolution of the indicated waveform.
The commands are relevant for data conversion if binary data format is defined
(FORM UINT, 8|16|32).
Suffix:
<m>
.
1..4
Return values:
<Yresolution> For default waveforms, the resolution is 8 bit.
If high resolution, average or filter are set for the waveform, the
resolution is 16 bit.
Example: See Chapter 15.2.1.4, "Reading Waveform Data in Unsigned
Integer Format", on page 243
Usage: Query only
15.9.2 Waveform Data Export to File
EXPort:WAVeform:SOURce............................................................................................349
EXPort:WAVeform:NAME............................................................................................... 350
EXPort:WAVeform:SAVE................................................................................................350
EXPort:WAVeform:SOURce <WaveformSource>
Defines the waveform to be exported.
Documenting Results