Maintenance
R&S
®
RTB2000
459User Manual 1333.1611.02 ─ 04
16 Maintenance
The instrument does not need a periodic maintenance. Only the cleaning of the instru-
ment is essential.
To protect the front panel and to transport the instrument to another workplace safely
and easily, several accessories are provided. The type designations and order num-
bers are listed in the data sheet.
In case of instrument damage, contact the nearest Rohde & Schwarz service center. A
list of all service centers is available on www.services.rohde-schwarz.com.
The addresses of Rohde & Schwarz support centers can be found at www.customer-
support.rohde-schwarz.com.
16.1 Cleaning
Risk of electric shock
If moisture enters the casing, for example if you clean the instrument using a moist
cloth, contact with the instrument can lead to electric shock. Before cleaning the instru-
ment other than with a dry cloth, make sure that the instrument is switched off and dis-
connected from all power supplies.
Instrument damage caused by cleaning agents
Cleaning agents contain substances such as solvents (thinners, acetone, etc.), acids,
bases, or other substances. Solvents can damage the front panel labeling, plastic
parts, or screens, for example.
Never use cleaning agents to clean the outside of the instrument. Use a soft, dry, lint-
free dust cloth instead.
Risk of instrument damage due to obstructed fans
If the instrument is operated in dusty areas, the fans become obstructed by dust or
other particles over time. Check and clean the fans regularly to ensure that they always
operate properly. If the instrument is run with obstructed fans for a longer period, the
instrument overheats, which can disturb the operation and even cause damage.
1. Clean the outside of the instrument using a soft, dry, lint-free dust cloth.
Cleaning
To Next Page
Loading...
