Rohde & Schwarz R&S RTB2004 - Documenting Results; Transfer of Waveform Data

Remote Control Commands
R&S
®
RTB2000
338User Manual 1333.1611.02 ─ 04
TCOunter:ENABle <Enable>
Enables or disables the trigger counter measurements.
Parameters:
<Enable> ON | OFF
TCOunter:RESult[:ACTual]:FREQuency?
Returns the frequency of the trigger source.
Return values:
<FrequencyValue> Default unit: Hz
Usage: Query only
TCOunter:RESult[:ACTual]:PERiod?
Returns the period of the trigger source.
Return values:
<PeriodValue> Default unit: s
Usage: Query only
15.9 Documenting Results
This chapter describes commands on how to transfer data from the instrument to a
computer, how to export data to file, how to print and save screenshots, and how to
manage measurement settings.
● Transfer of Waveform Data...................................................................................338
● Waveform Data Export to File...............................................................................349
● Screenshots.......................................................................................................... 350
● Instrument Settings: Mass MEMomory Subsystem.............................................. 352
15.9.1 Transfer of Waveform Data
This chapter describes data transfer commands that have effect on other commands in
different applications of the instrument, and transfer commands that work in the same
way.
15.9.1.1 Analog Channels
FORMat[:DATA].............................................................................................................339
FORMat:BORDer...........................................................................................................340
CHANnel<m>:DATA?.....................................................................................................340
CHANnel<m>:DATA:HEADer?........................................................................................ 341
Documenting Results