General Instrument Setup
R&S
®
RTB2000
144User Manual 1333.1611.02 ─ 04
"10 MHz"
Outputs a 10 MHz reference frequency.
"Function Generator"
Outputs the waveform specified in the "Function Generator" dialog.
"Mask Violation"
Outputs a pulse when a mask is violated.
This setting is only available if a mask is specified in the "Mask" dia-
log.
Remote command:
TRIGger:OUT:MODE on page 369
Firmware Update
See Chapter 10.9, "Updating the Firmware", on page 152.
Options
See Chapter 10.8, "Options", on page 151.
Date & Time
See Chapter 10.6, "Setting the Data, Time and Language", on page 149.
Education Mode
Disables several functions for educational purposes or enables these functions for nor-
mal usage.
"Education Mode"
If enabled, the autoset, quick measurement and automatic measure-
ment are disabled and not available. The active education mode is
indicated in the upper right corner by a doctoral cap icon.
"Set Password"
You can enter a password to prevent unauthorized activation or deac-
tivation of the education mode.
Instrument Settings
To Next Page
Loading...
