General Instrument Setup
R&S
®
RTB2000
147User Manual 1333.1611.02 ─ 04
Remote command:
DISPlay:INTensity:GRID on page 362
LED Brightness ← Intensities
Defines the intensity of illuminated front panel keys and rotary knobs in percent.
Remote command:
DISPlay:INTensity:BACKlight on page 361
Dots Only
If activated, only the individual data points are displayed. If deactivated, the individual
data points are connected by a line.
Remote command:
DISPlay:STYLe on page 363
Inverse Brightness
Inverts the brightness level of the signals. Normally, values that occur frequently are
brighter than rare values. This setting inverts this behavior: Rare values are brighter
than frequent values. Use this setting in combination with persistence to detect rare
values within the waveform.
Remote command:
DISPlay:PALette on page 362
Grid
Defines how the grid is displayed.
"Lines"
Displays the grid as horizontal and vertical lines.
"Reticle"
Displays crosshairs instead of a grid.
"Off"
Removes the grid from the display.
Remote command:
DISPlay:GRID:STYLe on page 361
Annotation ← Grid
Enables or disables display of scale values and units for the x-axis and y-axis at the
grid lines. Per default, grid labels are enabled.
Display Settings
To Next Page
Loading...
