Rohde & Schwarz R&S RTB2004 - Page 401

Remote Control Commands
R&S
®
RTB2000
393User Manual 1333.1611.02 ─ 04
<o> *
Selects the byte number.
Return values:
<ByteComplete> ON | OFF
ON
Data byte was received completely.
Usage: Query only
BUS<b>:I2C:FRAMe<n>:BYTE<o>:STARt?
Returns the start time of the specified data byte.
Suffix:
<b>
.
1 | 2
<n> *
Selects the frame.
<o> *
Selects the byte number.
Return values:
<StartTime> Range: depends on sample rate, record length, and time
base
Increment: depends on the time base
Default unit: s
Usage: Query only
BUS<b>:I2C:FRAMe<n>:BYTE<o>:VALue?
Returns the decimal value of the specified byte.
Suffix:
<b>
.
1 | 2
<n> *
Selects the frame.
<o> *
Selects the byte number.
Return values:
<ByteValue> Decimal value
Range: 0 to 255
Increment: 1
Example:
BUS:I2C:FRAM2:BYTE2:VAL?
-> 158
Usage: Query only
Serial Bus Analysis