Remote Control Commands
R&S
®
RTB2000
422User Manual 1333.1611.02 ─ 04
BUS<b>:LIN:FRAMe<n>:CSValue?................................................................................. 424
BUS<b>:LIN:FRAMe<n>:IDPValue?................................................................................ 424
BUS<b>:LIN:FRAMe<n>:IDSTate?..................................................................................424
BUS<b>:LIN:FRAMe<n>:IDValue?.................................................................................. 424
BUS<b>:LIN:FRAMe<n>:SYSTate?.................................................................................425
BUS<b>:LIN:FRAMe<n>:SYValue?................................................................................. 425
BUS<b>:LIN:FRAMe<n>:VERSion?.................................................................................425
BUS<b>:LIN:FRAMe<n>:BCOunt?.................................................................................. 426
BUS<b>:LIN:FRAMe<n>:BYTE<o>:STATe?.....................................................................426
BUS<b>:LIN:FRAMe<n>:BYTE<o>:VALue?..................................................................... 426
BUS<b>:LIN:FCOunt?
Returns the number of received frames of the active LIN bus.
Suffix:
<b>
.
1 | 2
Return values:
<FrameCount> Total number of decoded frames.
Usage: Query only
BUS<b>:LIN:FRAMe<n>:DATA?
Returns the data bytes of the specified frame.
Suffix:
<b>
.
1 | 2
<n> *
Selects the frame (1...n).
Return values:
<FrameData> Comma-separated list of decimal values of the data bytes.
Usage: Query only
BUS<b>:LIN:FRAMe<n>:STATus?
Returns the overall state of the specified frame.
Suffix:
<b>
.
1 | 2
<n> *
Selects the frame (1...n).
Return values:
<FrameStatus> OK | UART | CHCKsum | PRERror | SYERror | WAKeup |
INSufficient | ERR | LENer
Usage: Query only
Serial Bus Analysis
To Next Page
Loading...
