Rohde & Schwarz RTM2032 - Operand 2; Edit Constant; Constant; Decimal Point

Mathematics
R&S
®
RTM20xx
108User Manual 1317.4726.02 ─ 01
"MA1 | MA2 |
MA3 | MA4"
A mathematical waveform. Only math waveforms with lower number
are available.
Operand 2 ← Edit Equations
Defines the second operand for the mathematical operation, if required. The source can
be any active channel signal, a constant value, or a mathematical waveform with lower
number than the one to be defined.
"CH1 | CH2 |
CH3 | CH4"
An active channel waveform
"Const."
A constant value
"MA1 | MA2 |
MA3 | MA4"
A mathematical waveform. Only math waveforms with lower number
are available.
Edit Constant
← Edit Equations
Provides functions to define a constant value to be used in a mathematical operation. In
addition to the value, a decimal point, the unit and an SI-prefix can be defined.
This softkey is only available if "Constant" is selected as one of the operands.
Constant ← Edit Constant ← Edit Equations
Specifies a pre-defined constant or a user-defined constant for a mathematical operation.
Either one of the following pre-defined constants can be selected, or one of 10 user-
defined constants.
●
Pi
●
2*Pi
●
1/2*Pi
●
e
Value ← Edit Constant ← Edit Equations
Specifies the value for a user-defined constant. This function is only available if one of
the user-defined constants is selected by the "Constant" softkey.
Decimal Point ← Edit Constant ← Edit Equations
Moves the decimal point within the user-defined constant value.
Prefix ← Edit Constant ← Edit Equations
Defines an SI-prefix for the unit of a user-defined constant value. The following prefixes
are available:
●
None
●
m (Milli, 10
-3
)
●
μ (Mikro, 10
-6
)
●
n (Nano, 10
-9
)
●
p (Piko, 10
-12
)
●
f (Femto, 10
-15
)
Reference for Mathematics