Rohde & Schwarz RTM2032 - Sound, Stop, Screenshot, Print, Waveform; Masks Test off

Masks
R&S
®
RTM20xx
131User Manual 1317.4726.02 ─ 01
"Waveform"
Saves the waveform data according to the settings in FILE > "Wave-
form".
Remote command:
MASK:ACTion:SOUNd:EVENt:MODE on page 357
MASK:ACTion:STOP:EVENt:MODE on page 357
MASK:ACTion:SCRSave:EVENt:MODE on page 357
MASK:ACTion:PRINt:EVENt:MODE on page 357
MASK:ACTion:WFMSave:EVENt:MODE on page 357
Sound, Stop, Screenshot, Print, Waveform ← Actions
For each action, you can define when and how often the action will be executed.
"Off"
No action is executed.
"Each"
The selected action is executed on each violation of the mask.
"After n / n"
"Single": The selected action is executed once after the n-th violation.
"Cyclic": The selected action is executed repeatedly after each n-th
violation.
Set the execution interval with softkey "n".
Remote command:
MASK:ACTion:SOUNd:EVENt:COUNt on page 358
MASK:ACTion:STOP:EVENt:COUNt on page 358
MASK:ACTion:SCRSave:EVENt:COUNt on page 358
MASK:ACTion:PRINt:EVENt:COUNt on page 358
MASK:ACTion:WFMSave:EVENt:COUNt on page 358
Masks Test Off
Turns off the mask test and exits the "Mask" menu.
Remote command:
MASK:STATe on page 355
Reference for MASKS key