Data and File Management
R&S
®
RTM20xx
223User Manual 1317.4726.02 ─ 01
Source.........................................................................................................................223
Destination..................................................................................................................223
Import/Export...............................................................................................................223
Source
Opens the "Load" menu and a file explorer to select the source file of the import/export
operation.
See "Load Menu" on page 221.
Destination
Opens the "Storage" menu and a file explorer to select the destination of the import/export
operation.
See "Storage Directory Menu" on page 221.
Import/Export
Copies the selected source file to the specified file in the selected destination directory.
Note: If a file with the same file name already exists in the destination directory, it will be
overwritten without notification.
Remote command:
MMEMory:COPY on page 448
13.2.2 Quick Access with PRINT key
The PRINT key is a shortcut key that initiates the associated action. With this key it is
easy to save, for example, a series of waveform data or screenshots.
You can assign one of the following actions to the PRINT key:
●
Save device settings
●
Save a waveform
●
Save a screenshot
●
Save a screenshot and the device settings
●
Print a screenshot
Saving data
You also can save data without changing the behavior of the PRINT key by pressing
"Save" for the selected data type in the FILE menu.
Saving and Loading
To Next Page
Loading...
