Rohde & Schwarz RTM2032 - Page 237

Data and File Management
R&S
®
RTM20xx
222User Manual 1317.4726.02 ─ 01
Waveforms and screenshots can only be stored on a USB stick connected to the front or
rear panel, not to an internal directory. If you want to store a waveform or scrrenshot, and
no USB stick is currently connected, the "Storage" softkey is not available.
See also: chapter 13.2.1, "Storage Locations", on page 217.
Storage (Internal/Front/Rear)......................................................................................222
Change Directory........................................................................................................222
Create Directory..........................................................................................................222
Remove Directory.......................................................................................................222
Storage (Internal/Front/Rear)
Defines the storage device.
Waveforms and screenshots can only be stored on a USB stick connected to the front or
rear panel, not to an internal directory. In this case, the softkey is only available if a USB
stick is connected to the rear or front panel.
"Internal"
Directly in the internal memory of the instrument
"Front"
On a USB stick connected to the front panel
"Rear"
On a USB stick connected to the rear panel
Remote command:
MMEMory:MSIS on page 444
Change Directory
Switches to the selected directory.
See also: "To select the storage directory" on page 218.
Remote command:
MMEMory:CDIRectory on page 445
Create Directory
Creates a new subdirectory of the currently selected storage directory.
See also: "To define a new file or directory name" on page 218.
Remote command:
MMEMory:MDIRectory on page 445
Remove Directory
Removes the currently selected directory.
Remote command:
MMEMory:RDIRectory on page 445
Import/Export Menu
The "Import/Export" menu provides functions to copy data between the instrument and
a USB flash device.
See also: chapter 13.2.1.2, "Importing and Exporting Data", on page 218
Saving and Loading