Remote Control
R&S
®
RTM20xx
345User Manual 1317.4726.02 ─ 01
Return values:
<ValueList> Comma-separated list of statistical values
Usage: Query only
MEASurement<m>:STATistics:VALue<n>?
Returns one statistical value from the indicated buffer place.
Note that valid buffered values can only be read if the acquisition is stopped. As long as
the acquisition is running, the buffer contents is changing and the buffered values are not
valid for reading.
Suffix:
<m>
.
1..4
Selects the measurement place.
<n> *
Buffer place. The buffer size is limited by MEASurement<m>:
STATistics:WEIGht.
Return values:
<StatisticValue> Statistical value
Usage: Query only
15.2.9 Mathematics
This chapter describes commands that configure or perform mathematical functions.
For data queries and conversion, consider also the following commands:
● FORMat[:DATA] on page 278
● CALCulate:MATH<m>:DATA:XINCrement? on page 280
● CALCulate:MATH<m>:DATA:XORigin? on page 279
● CALCulate:MATH<m>:DATA:YINCrement? on page 280
● CALCulate:MATH<m>:DATA:YORigin? on page 280
● CALCulate:MATH<m>:DATA:YRESolution? on page 281
CALCulate:MATH<m>:STATe.........................................................................................345
CALCulate:MATH<m>:SCALe.........................................................................................346
CALCulate:MATH<m>:POSition......................................................................................346
CALCulate:MATH<m>[:EXPRession][:DEFine]..................................................................346
CALCulate:MATH<m>:DATA?.........................................................................................347
CALCulate:MATH<m>:DATA:HEADer?............................................................................348
CALCulate:MATH<m>:STATe <State>
Defines whether the selected mathematical channel is active or not. Only if a channel is
active it is visible on the screen and can be selected as a source for analysis and display
functions.
Command Reference
To Next Page
Loading...
