Rohde & Schwarz RTM2032 - Data and File Management

Remote Control
R&S
®
RTM20xx
441User Manual 1317.4726.02 ─ 01
15.2.15 Data and File Management
This chapter describes commands on how to print and save screenshots, and how to
manage measurement settings and data..
● Screenshots..........................................................................................................441
● Saving and Loading Data: MMEMory Commands................................................443
15.2.15.1 Screenshots
This chapter describes remote commands used to print and save screenshots.
HCOPy:DESTination......................................................................................................441
MMEMory:NAME...........................................................................................................441
HCOPy[:IMMediate].......................................................................................................442
HCOPy:LANGuage........................................................................................................442
HCOPy:PAGE:SIZE.......................................................................................................442
HCOPy:PAGE:ORIentation.............................................................................................442
HCOPy:COLor:SCHeme.................................................................................................442
SYSTem:COMMunicate:PRINter:SELect..........................................................................443
SYSTem:COMMunicate:PRINter:ENUMerate:FIRSt?........................................................443
SYSTem:COMMunicate:PRINter:ENUMerate[:NEXT]?......................................................443
HCOPy:DESTination <Medium>
Defines whether the screenshot is saved or printed.
Parameters:
<Medium> MMEM | SYST:COMM:PRIN
String parameter
MMEM
Saves the screenshot to a file. Specify the file name and location
with MMEMory:NAME.
SYST:COMM:PRIN
Prints on the printer specified with SYSTem:COMMunicate:
PRINter:SELect. The printer must be specified before the
HCOPy:DESTination is sent.
*RST: MMEM
Example:
HCOP:DEST "MMEM"
chapter 15.3.3.1, "Saving Screenshots to File", on page 461
MMEMory:NAME <FileName>
Defines the file name to store an image of the display with HCOPy[:IMMediate].
Parameters:
<FileName> String parameter
Example:
chapter 15.3.3.1, "Saving Screenshots to File", on page 461
Command Reference