General Instrument Setup
R&S
®
RTM20xx
238User Manual 1317.4726.02 ─ 01
Interface ← Update
Some interfaces are provided with their own instrument-independant firmware. This
interface firmware can also be updated. The currently installed firmware version is dis-
played, as well as all available update versions, if a USB flash drive containing an update
is identified. The instrument is only updated when you press "Execute".
Note: You should update the interface firmware in regular intervals to take advantage of
new functions and solve possible problems.
Execute ← Interface ← Update
The interface firmware is updated.
Upgrade ← Update
Provides functions to activate options.
Read keys from license file ← Upgrade ← Update
Select the storage and directory where your license file is stored, and press "Load" to
activate the options.
Input key manually ← Upgrade ← Update
Opens the on-screen keyboard to enter the license key of the option.
Printer
Opens a menu to configure the output on the printer: paper format, orientation, color, and
printer language. The printer has to be connected to a (Type A) USB port.
For details, see chapter 13.1.2, "Printer Settings", on page 216.
Sound
Defines the event types for which a sound is to be generated by the instrument. Switch
the sound for a particular event type on or off by selecting the corresponding softkey.
Active sounds are highlighted.
Control Beep ← Sound
Generates a sound for general control events, e.g. reaching the rotary encoder end or
changing the measuring mode in the "Automeasure" menu.
Remote command:
SYSTem:BEEPer:CONTrol:STATe on page 452
Error Beep ← Sound
Generates a a sound if an error occurs in the instrument, e.g. when the input exceeds 50
Ω or a false value is entered in a dialog.
Remote command:
SYSTem:BEEPer:ERRor:STATe on page 452
Trigger Beep ← Sound
Generates a sound when the trigger condition is fulfilled.
Remote command:
SYSTem:BEEPer:TRIG:STATe on page 452
Reference for Setup
To Next Page
Loading...
