Rohde & Schwarz RTM2032 - Page 467

Remote Control
R&S
®
RTM20xx
452User Manual 1317.4726.02 ─ 01
Parameters:
<Hour> Range: 0 to 23
Increment: 1
Default unit: h
<Minute> Range: 0 to 59
Increment: 1
Default unit: min
<Second> Range: 0 to 59
Increment: 1
Default unit: s
Usage: SCPI confirmed
SYSTem:
BEEPer:CONTrol:STATe
Enables or diables a sound for general control events, e.g. reaching the rotary encoder
end or changing the measuring mode in the "Automeasure" menu.
Parameters:
<ControlBeep> ON | OFF
SYSTem:BEEPer:ERRor:STATe
Enables or disables the beep if an error occurs.
Parameters:
<ErrorBeep> ON | OFF
SYSTem:BEEPer:TRIG:STATe
Enables or disables the beep if a trigger occurs.
Parameters:
<TriggerBeep> ON | OFF
SYSTem:BEEPer[:IMMediate]
Generates an immediate beep.
Usage:
Event
SYSTem:SET <Setup>
Defines or queries the device settings that can be saved and load manually with FILE >
"Device Settings".
Parameters:
<Setup> 488.2 block data
Usage: SCPI confirmed
Command Reference