General Instrument Setup
R&S
®
RTM20xx
233User Manual 1317.4726.02 ─ 01
14 General Instrument Setup
This chapter describes the firmware update, the activation of new options, and all softkeys
of the "Setup" menu.
The usage of the functions except of update is described in other chapters depending on
the usage context:
●
chapter "Defining General Instrument Settings" in the "Getting Started" manual: con-
figuring date, time, interface and help language, and sounds;
● chapter 15.1.2, "Setting Up a LAN Connection", on page 243.
14.1 Firmware and Options
● Updating Firmware................................................................................................233
● Activating Options.................................................................................................234
14.1.1 Updating Firmware
This chapter describes how to update the instrument's firmware and the interface firm-
ware.
You should update the instrument and interface firmware in regular intervals to take
advantage of new functions and solve possible problems.
1. Download the current firmware package from the instrument's Web page: http://
www.scope-of-the-art.com/product/rtm.html under "Downloads > Firmware".
The zip package contains the instrument firmware and interface firmware for all
R&S RTM20xx types.
2. Extract the zip package and copy the required files to a USB flash drive.
3. Insert the USB flash drive in the instrument.
4. Press SETUP.
5. Press "More".
6. Press "Update > Firmware".
The currently installed firmware version as well as all available update versions are
displayed.
7. Press "Execute" to start the firmware update.
To update the interface firmware
1. Insert a USB flash drive containing an interface update file in the instrument.
Firmware and Options
To Next Page
Loading...
