Remote Control
R&S
®
RTM20xx
346User Manual 1317.4726.02 ─ 01
Suffix:
<m>
.
1..4
Selects the math waveform.
Parameters:
<State> ON | OFF
*RST: OFF
CALCulate:MATH<m>:SCALe <Scale>
Sets the vertical scale for the specified math waveform.
In FFT mode, the command sets the vertical scale of the FFT window. The scale unit for
FFT is set with CALCulate:MATH<m>:FFT:MAGNitude:SCALe.
Suffix:
<m>
.
1..4
Selects the math waveform.
IN FFT mode, the numeric suffix is irrelevant.
Parameters:
<Scale> Scale value
Range: -1.0E-24 to 5.0E+25
Increment: 1, 2, 5 progression, for example, 1mV/div, 2mV/div,
5mV/div, 10, 20, 50...
*RST: 1
CALCulate:MATH<m>:POSition <Position>
Sets the vertical position of the specified math waveform in the window.
Suffix:
<m>
.
1..4
Selects the math waveform.
Parameters:
<Position> Position value, given in divisions.
Range: -1,88E+005 to 2,12E+005
Increment: 0.01 in reset state
*RST: 2
CALCulate:MATH<m>[:EXPRession][:DEFine] <RemComplExpr>
Defines the equation to be calculated for the selected math waveform as a regular
expression.
For details on available operators, see "Operator" on page 103.
Suffix:
<m>
.
1..4
Selects the math waveform.
Command Reference
To Next Page
Loading...
