Data and File Management
R&S
®
RTM20xx
221User Manual 1317.4726.02 ─ 01
Save
Saves the data to the selected storage directory. The used file name is displayed when
storage is completed.
Remote command:
Device settings: MMEMory:STORe:STATe on page 449
Other data: MMEMory:DATA on page 449
Load Menu
The "Load" menu provides functions and a file explorer to select data files and to load it
for usage. It is displayed whenever some data has to be loaded.
Storage........................................................................................................................221
Remove File................................................................................................................221
Load............................................................................................................................221
Storage
Opens the storage directory submenu, see "Storage Directory Menu" on page 221.
Remove File
Deletes the selected file.
Remote command:
MMEMory:DELete on page 448
Load
Loads the selected file to the instrument.
During an import/export operation, this command confirms the selection of a file and loads
it temporarily. In order to actually copy the file to the selected destination, press "Import/
Export".
Remote command:
Device settings: MMEMory:LOAD:STATe on page 449
Storage Directory Menu
The storage directory menu is opened with the "Storage" softkey that is available in all
"Save" and "Load" menus. Here you define the storage device and the directory where
the file will be saved or loaded from. If appropriate, you can also create new directories
or delete existing ones.
Saving and Loading
To Next Page
Loading...
