Rohde & Schwarz RTM2032 - Page 235

Data and File Management
R&S
®
RTM20xx
220User Manual 1317.4726.02 ─ 01
13.2.1.3 General Storage Settings
This chapter describes the general settings to save, load, and export/import data.
● Save Menu............................................................................................................220
● Load Menu............................................................................................................221
● Storage Directory Menu........................................................................................221
● Import/Export Menu...............................................................................................222
Save Menu
The "Save" menu provides functions to configure how the data is saved and to start the
save process. Its main functions are displayed whenever some data has to be stored.
Depending on the data type, additional specific functions may be provided. These func-
tions are described in the relevant chapters.
Storage........................................................................................................................220
File name....................................................................................................................220
Comment.....................................................................................................................220
Save............................................................................................................................221
Storage
Opens the storage directory submenu, see "Storage Directory Menu" on page 221.
File name
Opens on-screen keyboard to define a new file name to which the data is stored.
Note: If a file with the same file name already exists in the destination directory, it will be
overwritten without notification.
Turn the NAVIGATION knob to mark a character and press the knob to select it. Press
"Backspace" to delete the character to the left of the cursor. Press the "Cursor →" and
"Cursor ←" softkeys to scroll through the characters of the name. Press "Default name"
to restore the standard file name.
Press "Accept" to save the defined name.
Remote command:
MMEMory:NAME on page 441
Comment
Opens an on-screen keyboard to insert a comment to the stored data. Comments are
available for all file formats that can be read by the R&S RTM: device settings, reference
waveforms (trf format), masks, equation sets.
Saving and Loading