Search
R&S
®
RTM20xx
133User Manual 1317.4726.02 ─ 01
Fig. 10-1: Results of an edge search with R&S
RTM
1 = Search results
2 = Marked search results
3 = Selected search result
4 = Search conditions
5 = Number of results, scope of results displayed in the results table
6 = Result values: result number, time value, optional value depending on the search type (voltage, width)
Remote commands:
● SEARch:RCOunt? on page 374
● SEARch:RESult:ALL? on page 373
● SEARch:RESult<n>? on page 373
Search Conditions and Results