Protocol Analysis
R&S
®
RTM20xx
193User Manual 1317.4726.02 ─ 01
Fig. 11-12: Decoded CAN signal with frame table and applied label list
violet = identifier
gray = DLC, data length code
blue = data words
red = error occured, error frame
Table 11-4: Content of the CAN frame table
Column Description
Start time Time of frame start in relation to the trigger point
Type Frame type: Data, Remote, Error, or Overload
ID Identifier value, hexadecimal value
Label Symbolic label, available if a label list was loaded and applied
DLC Data length code, number of data bytes
Data Hexadecimal values of the data bytes
CRC Hexadecimal value of the Cyclic Redundance Check (checksum)
State Overall state of the frame.
CAN (Option R&S RTM-K3)
To Next Page
Loading...
