Rohde & Schwarz RTM2032 - Page 413

Remote Control
R&S
®
RTM20xx
398User Manual 1317.4726.02 ─ 01
Return values:
<AckStartTime> Range: depends on sample rate, record length, and time
base
Increment: depends on the time base
Default unit: s
Usage: Query only
BUS<b>:I2C:FRAMe<n>:BYTE<o>:COMPlete?
Returns the state of the byte.
Suffix:
<b>
.
1..4
Selects the bus.
<n> *
Selects the frame.
<o> *
Selects the byte number.
Return values:
<ByteComplete> ON | OFF
ON
Data byte was received completely.
Usage: Query only
BUS<b>:I2C:FRAMe<n>:BYTE<o>:STARt?
Returns the start time of the specified data byte.
Suffix:
<b>
.
1..4
Selects the bus.
<n> *
Selects the frame.
<o> *
Selects the byte number.
Return values:
<StartTime> Range: depends on sample rate, record length, and time
base
Increment: depends on the time base
Default unit: s
Usage: Query only
BUS<b>:I2C:FRAMe<n>:BYTE<o>:VALue?
Returns the decimal value of the specified byte.
Command Reference