Rohde & Schwarz SMC100A - Page 100

Instrument Function
R&S
®
SMC100A
85Operating Manual 1411.4060.32 ─ 09
An option is ready to operate after it is enabled by means of a license key code sup-
plied with the option. The license key is delivered as a file or on paper. Unregistered
licenses must be registered for a particular instrument prior to the corresponding option
can be enabled for operation.
License Registration
If your purchased license is delivered unregistered, you must register it before you can
activate the option.
For detailed information about the license registration, refer to the installation instruc-
tions provided with the option (Supplement A) and the documentation of the online tool
"Manage Licenses" (https://extranet.rohde-schwarz.com/service).
Only if the R&S SMC is equipped with an older firmware version, a firmware update
prior to enabling the software option may be required. The information on the valid
firmware versions for the purchased software option is provided together with the
option.
The firmware update is described in the service manual, chapter 4.
Device ID
Displays the instrument specific identification number. The device ID is an unique
string with the following structure:
<stock number>-<serial number>-<checksum>
Enter License Key
Type here the license key provided with the option.
For license keys delivered as a file, use Import License Key from File....
Import License Key from File...
Opens a dialog for selecting the file with the license key.
Export Deactivation Response to File...
Exports the generated deactivation response key to a file and opens a file manage-
ment dialog to save the file. This key is required during the unregistration process.
Status Information
Displays status information.
General Instrument Settings