Rohde & Schwarz SME02 - Page 442

List of Commands SME
1038.6002.02 8C.12 E-12
Command
Parameter
SCPI
info
Page
[:SOURce]:PULSe:DOUBle:DELay 60 ns to 1 s 3.90
[:SOURce]:PULSe:DOUBle[:STATe] ON | OFF 3.90
[:SOURce]:PULSe:PERiod 100 ns to 85 s 3.90
[:SOURce]:PULSe:WIDTh 20 ns to 1s 3.90
[:SOURce]:REFLex25:AADaptation ON | OFF not-SCPI 3.96
[:SOURce]:REFLex25:DEViation 2.0 to 10.0 kHz not-SCPI 3.92
[:SOURce]:REFLex25:ERRor:MASK 0 to 4294967295 not-SCPI 3.95
[:SOURce]:REFLex25:ERRor:WORD 0 to 351 not-SCPI 3.95
[:SOURce]:REFLex25:FCONtent ’I|A|N|T|S|R|B|F|O|1|2|3|4|5|6|7|8|9
[,I|A|N|T|S|R|B|F|O|1|2|3|4|5|6|7|8|9]
not-SCPI 3.96
[:SOURce]:REFLex25:MESSage:ALPHanumeric:CATalog? not-SCPI 3.93
[:SOURce]:REFLex25:MESSage:ALPHanumeric:DATA 3.93
[:SOURce]:REFLex25:MESSage:ALPHanumeric[:SELect] 3.93
[:SOURce]:REFLex25:MESSage:NUMeric 3.93
[:SOURce]:REFLex25:MESSage:PADDress 16777216 to 1073741823 not-SCPI 3.92
[:SOURce]:REFLex25:MESSage:RREQuired ON | OFF not-SCPI 3.93
[:SOURce]:REFLex25:MODulation 1600, FSL2 | 3200, FSK2 | 3200,FSK4 |
6400,FSK4
not-SCPI 3.92
[:SOURce]:REFLex25:SI|SINFormation:FCHannel:ANUMber 0 to 2047 not-SCPI 3.94
[:SOURce]:REFLex25:SI|SINFormation:FCHannel:ANUMber 0 to 2047 not-SCPI 3.94
[:SOURce]:REFLex25:SI|SINFormation:FCHannel:BASE 0 to 8191 MHz not-SCPI 3.94
[:SOURce]:REFLex25:SI|SINFormation:FCHannel:SPEed 800 | 1600 | 6400 | 9600 not-SCPI 3.95
[:SOURce]:REFLex25:SI|SINFormation:FSPacing 0 to 102350 not-SCPI 3.95
[:SOURce]:REFLex25:SI|SINFormation:PROVider 0 to 16383 not-SCPI 3.94
[:SOURce]:REFLex25:SI|SINFormation:RCHannel:BASE 0 to 8191 MHz not-SCPI 3.94
[:SOURce]:REFLex25:SI|SINFormation:SCIBase 0 to 127 not-SCPI 3.95
[:SOURce]:REFLex25:SI|SINFormation:SCICollapse 0 to 7 not-SCPI 3.95
[:SOURce]:REFLex25:SI|SINFormation:SZONe 0 to 127 not-SCPI 3.94
[:SOURce]:REFLex25:SI|SINFormation:ZONE 0 to 4091 not-SCPI 3.93
[:SOURce]:REFLex25:STATe ON | OFF not-SCPI 3.92