8 | Functions and settings
Page 34 of 104 CIRUS
®
UPT-6400 VERSION 1 | EN-US
Menu
num-
ber
Menu
item
Available
only
when the
timer is
activated
(menu
number
401)
Description Setting range
Standard
content
The set setpoint and the current actual value are shown
numerically. The actual value is also indicated by the
progress bar. The setpoint and actual value are shown as
a graph as well.
When the timer is active (menu number 401), the sealing
time and the cooling value are also shown.
Touch Manual to begin manual heatup (to the set seal-
ing temperature).
101 Sealing
tempera-
ture
Press Up and Down to set the desired sealing tempera-
ture (setpoint). The maximum setpoint can be limited in
menu number 305 or in menu number 306. If the sealing
temperature is to be specified via voltage at the analog
input (terminals 36+39), set the sealing temperature to
0°C. The setpoint is shown in the standard screen.
If an external sealing temperature (analog input termi-
nals36+39) and an internal sealing temperature are
specified at the same time, the higher temperature is
used and shown in the standard screen.
Depending on the
setting in menu num-
ber 305: 0°C, 40°C
… maximum temper-
ature (menu number
306)
104 Sealing
time
x Use Up and Down to set the duration of the sealing pulse.
The set sealing time is shown in the standard screen.
0 … 5.00 sec, exter-
nal (Refer to section
Setting sealing time)
105 Cooling
tempera-
ture /
cooling
time
x The cooling temperature / cooling time can be set in this
menu item as a factor of the cooling mode selected in
menu 402.
• Absolute: The cycle ends when the temperature falls
below the set cooling temperature.
• Relative: The cycle ends when the temperature falls
below the set proportional cooling temperature.
100% corresponds to the set setpoint.
• Time: The cycle ends when the cooling time has
elapsed.
The current cooling value is shown in the standard
screen.
Not available if cooling mode is OFF in menu number
402.
Absolute:
20°C … maximum
temperature (menu
number 306).
Relative:
20% … 100%
Time:
0.00… 99.98s