Ropex CIRUS UPT-6400 - Page 5

Table of Contents
VERSION 1 | EN-US CIRUS
®
UPT-6400 Page 5 of 104
8.5.3 Hold mode 67
8.6 Timer function 68
8.6.1 Activation 68
8.6.2 Setting start delay 69
8.6.3 Setting sealing time 70
8.6.4 Setting cooling mode 70
8.6.5 Setting cooling value 71
8.6.6 Setting beginning time of sealing 72
8.6.7 Example 73
8.7 Recipes 76
8.7.1 Recipe control 76
8.7.2 Blocking configuration menu 78
8.8 Functions for special applications 79
8.8.1 Correction factor 79
8.8.2 Channel selection (CH0…CH2) 79
8.8.3 TCR calculator 80
8.9 Adapting to special sealing applications 81
8.9.1 Measuring pulse duration 81
9 Restarting after changing the heating element 82
10 Monitoring and error detection 83
10.1 System monitoring and alarm output 83
10.2 Error messages 84
10.2.1 Part 1 of 3: Troubleshooting 84
10.2.2 Part 2 of 3: Troubleshooting 85
10.2.3 Part 3 of 3: Troubleshooting 86
10.3 Fault areas and causes 87
11 Maintenance 89
12 Disposal 90
13 Technical data 91
13.1 Technical data 91
13.2 Modification 93
13.3 How to order 93
14 EU-Konformitätserklärung 96
15 Appendix 98
15.1 Example of electrical cabinet wiring 99
15.2 Examples of electrical connections 100
Index 102