DK00027.fm
REPAIR MANUAL
BRP-Powertrain
Effectivity: 125 MAX/125 Junior MAX/125 Mini
MAX/125 Micro MAX
Edition 2 / Rev. 0
Chapter 5
Page 24
December 01/2010
Instructions
See Figure 15.
Graphic Assembly of crankshaft
Figure 15 K00093, K00091, K00085
Step Procedure
10 Hold the crankshaft half as shown in Figure 13 and push the top section of the
tool (9) into the bottom section of the tool (4).
NOTES: A rotary movement of the con rod makes it easy to align
the web hole with the connecting rod pin.
11 Position the press-out ring (10) on the web half (position over the area of the
connecting rod pin) and press the two crankshaft halves together (until the
crankpin is flush with the crankshaft web).
Part Function
4 Bottom section of tool
9 Top section of tool
10 Press-out ring
To Next Page
Loading...
