Effectivity: 125 MAX/125 Junior MAX/125 Mini
MAX/125 Micro MAX
Edition 2 / Rev. 0
DK00024.fm
REPAIR MANUAL
BRP-Powertrain
Chapter 2
Page 11
December 01/2010
2) Visual inspection and servicing intervals of the engine components
Safety note
Non-compliance can result in serious injuries or
death!
All repair and maintenance work must only be carried
out by a qualified technician.
Points of Inspection
Interval
Operating hours
Chapter
Reference
Inspection, Remedial action
as
indicated
1.) General
Inspect spark plug, replace if necessary.
Inspect before every opera-
tion of vehicle
Replace spark plug.
Every 25 hours of operation
2.) Cooling system
Check coolant level.
Inspect before every opera-
tion of vehicle
Inspect water pump for sealing, in the
event of egress of oil or coolant from the
overflow orifice, have the pump repaired
by an authorised service center.
Inspect before every opera-
tion of vehicle
Inspect the cooling water connections on
the cooler housing and cylinder head
cover for tightness and sealing.
Inspect before every opera-
tion of vehicle
Inspect the radiator hoses and hose
clamps on the engine and radiator for
tightness and sealing.
Inspect before every opera-
tion of vehicle
3) Carburetor and intake silencer
Inspect the carburetor connections to the
engine and to the intake silencer for tight-
ness.
Immediately after every colli-
sion
Clean the filter element in the intake si-
lencer and lubricate with oil, replace
damaged filter element.
Every 10 hours ((Depending
on the conditions of use)
4) Fuel system
Inspect fuel filter for dirt, replace if re-
quired.
Inspect before every opera-
tion of vehicle
Inspect fuel filter from the carburetor.
Every 10 hours of operation
5) Exhaust system
Inspect exhaust system for sealing and
tightness, lubricate with oil to prevent
corrosion.
Inspect before every opera-
tion of vehicle
Replace the baffle in the exhaust system
silencer.
Every 10 hours of operation
To Next Page
Loading...
Need help?
General
