Rowe Scan 850i - Page 20

ROWE Scan Series floor stand 60”
Floor stand 60“: Height of feed table for
originals: 960 mm
ROWE Scan Series PC holder
for floor stand 44“ / 60”
PC holder for floor stand 44” and 60“
intended to accommodate a conventional
computer housing
ROWE Scan Series touch screen
Holder for floor stand 44“ / 60”
Bracket for touch screen and other flat
screens for floor stand 44” and 60“ with a size
of 17“ to 23“ with VESA MISD75/ 100 holder
and a maximum weight not exceeding 10 kg.
The flat screen is not included in the scope of
supply.
ROWE Scan Series MFP stand 44”
Intended to integrate a ROWE Scan 850i into
an inkjet printer (up-to-date list of compatible
printers on request). Height of feed table for
originals: 1,145 mm to 1,265 mm.
Including bracket for flat screen 17“ to 23“
with VESA MISD75/100 holder and a maximum
weight not exceeding 10 kg. The flat screen is
not included in the scope of supply.
ROWE Scan Series PC holder
for MFP stand 44“
PC holder for MFP stand 44“, intended to
accommodate a conventional PC housing
ROWE Scan Series touch screen
17“ to 23“ flat screen with DVI input and a
resolution
of 1,280 x 1,024 pixels
ROWE Scan Series Controller PC
Standard PC, information on features on
request
ROWE Scan Series Calibration Chart 44“
Calibration chart for ROWE Scan 850i 44“
ROWE Scan Series Calibration Chart 60“
Calibration chart for ROWE Scan 850i 60“
For information on the available accessories for the individual scanner types,
please refer to the current ROWE Scan 850i leaflet.