Rowe Scan 850i - Software Installation Process and Drivers

4.4 Installation Process
After actuating the "Install" button, the files
will be installed.
In the meantime, the installation progress
and the current state are displayed as
shown in Fehler! Verweisquelle konnte
nicht gefunden werden..
Figure 4.5: Installation process
4.5 Installation of Device Drivers
During data transmission several dialog
boxes pop up indicating that the
appropriate drivers for the device are being
installed. During installation, Windows
(Windows XP) may point out that the drivers
did not pass the so-called "Windows logo
testing" (Fehler! Verweisquelle konnte
nicht gefunden werden.). This is normal
and installation can be continued by
clicking "Continue anyway".
Figure 4.6: Windows logo testing
After having installed the drivers on the
computer, the installation can be continued
by pressing the "Finish" button (see
Fehler! Verweisquelle konnte nicht
gefunden werden.).
Figure 4.7: Driver installation
completed