4 Installation
In this chapter, you learn how to install the software on a PC to operate the ROWE Scan
850i. The PC shall comply with the minimum requirements mentioned in Chapter 3.5.
However, the optimum requirements indicated there are recommended.
When starting installation, the scanner must neither be connected to power
supply nor PC. Should you use mouse and keyboard on the scanner top, place
the cables in a way that they do not obstruct the paper outlet.
First install the software on the PC. The scanner must be connected only
afterwards.
The power unit of the scanner is fitted with a grounded three-core power plug.
Only skilled workers are allowed to modify plug and socket. Never bypass or
ignore grounding.
If the scanner is used together with an ecoPrint MFP you can skip this section.
To Next Page
