4.10 Activation of License Options
Should you have purchased additional
license options, you can install the license
file in the following dialog box. Proceed as
follows:
1. Open license file: Select the
license file (file extension
".key"). After purchasing ROWE
Scan 850i as well as later
upgrades, you obtain the file
usually by e-mail or on request
on an additional data carrier.
2. Press "Next“ to activate the
license or to proceed with the
already existing license.
1
If you obtained a license file by e-
mail, you have to save the attached
.key file on your PC, first, to be able
to select it under 1.
3. If you want to fit your ROWE
Scan 850i with additional
functions, you can confirm the
button labeled 3. ("Order
license“). If a connection to the
Internet is given, your Internet
browser pops up automatically
and you access the ROWE
website where you can order
further license options. As an
option, you can also contact the
ROWE Sales Department (see
Chapter 3.1).
Figure 4.19: License installation
4.11 Calibration of Scanner
Now, the scanner needs to be calibrated to
obtain perfect scan results.
For this purpose, place the supplied
calibration chart in the paper feed of the
scanner.
The calibration chart has to be
placed with the printed side facing
up and with the depicted arrow
By default, the ROWE Scan 850i is fitted with a 30-day trial license for ROWE SCAN/COPY
APP. This is why you can press "Next" immediately – unless you purchased additional
license options.
To Next Page
Loading...
