Rowe Scan 850i - Rowe Scan;Copy App Touch

creation of the output file is already started before completion of the scan
process by starting a scan with the green button Start (or in the Batchscan
mode) so that throughput is increased thereby.
Direct writing of the output file during scanning is possible under certain
conditions only and depends upon the selected settings. If, for example,
rotation is enabled (see 7.9), output can be started after completion of the
scan, only. If the settings are selected in a way that direct output is not
possible, output is started automatically only after completion of scan. Direct
output is possible only if the following requirements are met:
 Either JPEG or TIFF are selected as file format.
 The resolution is not 2400TURBO.
 Mirroring, rotating, inverting, and automatic alignment must be
deactivated.
 All margins are set to 0.
 Scaling (zoom) is 100 %, i.e. no scaling is effected (not to a
format either).
 No Multiprint output is effected.
 Load favorite "Standard" automatically after n minutes: Period in minutes after
which the favorite "Standard" shall be loaded automatically. The previous
settings get lost if they were not saved in a favorite (0: automatic loading
deactivated).
 Settings color depth b/w: Here, you can influence the color depth for output in
b/w mode which is hidden behind the color mode buttons (so-called Presets) in
b/w and/or gray scale mode. You can set the behavior for each b/w mode (line,
photo, mixed, and more) separated by Scan to File/Copy. By means of buttons 1.
and 2. you select to which mode the setting selected in 3. refers. You can select
the following settings:
 Black/white (1 bit)
 Dithered (1 bit)
 Gray scale (8 bits)
E.g. if you want to save the files as gray scale with 8 bits per pixel for Scan to
File, select Scan to File under 1., then Photo under 2. and finally Gray scale (8
bits) under 3.
Changed settings for a preset are enabled only after the modified preset is
loaded again.
 Content Infobox: Determine which files shall be displayed in the info box.
7.15 ROWE SCAN/COPY APP TOUCH
ROWE Scan 850i scanners can be operated with a desktop computer with mouse and
keyboard or with a touch screen. For touch screen operation, the specially optimized
version of ROWE SCAN/COPY APP is available while the regular version is not intended for
touch screen operation (i.e. without mouse and keyboard).
Appearance and varies only slightly. The decisive difference is that the buttons of the
user interface are much bigger to be able to actuate them better using the finger. As the