Why does my Rowe Scan 600-20 not detect the scanner?
If the Rowe ScanManager does not detect the scanner, ensure that the scanner is switched ON and recognized by your PC. If it is, try restarting the ScanManager.
What to do if my Rowe Scan 600-20 Scanner image file is not created in the target folder?
If the image file is not created in the target folder when scanning to file, ensure that you have the appropriate write permission for the target folder and that sufficient storage space is available.
How to fix if only a part of the original is scanned on my Rowe Scan 600-20 Scanner?
If only a part of the original is scanned, check the setting of the Scan format to ensure it is set to 'Auto' or a sufficiently large format. Also, make sure the document feed is centered.
How to fix one or several thin light or dark stripes in the image (in feed direction) on my Rowe Scanner?
If you notice one or several thin light or dark stripes in the image (in feed direction), clean the glass plate. Even small dust or dirt particles may result in a deterioration of the scan result. Afterwards, calibrate the scanner. If the problem persists, check the glass plate for scratches, and if there are any, replace it.
What to do if the image is not printed from my Rowe Scan 600-20?
If the image is not printed, check the job list to see if the print job may be stopped. Also, verify whether the printer can be accessed in the network.
Why parts of the image are missing on at least one side on my Rowe Scan 600-20 Scanner?
If parts of the image are missing on at least one side, make sure that the original is positioned in a straight and centered way. Check the original for damages, particularly at the front and front edges. If the background color (paper white) of the original is equal to the color of the transport rollers and the original is very thin, faulty detection may occur.
How to resolve if the image too wide on both sides on my Rowe Scan 600-20 Scanner?
If the image appears too wide on both sides, make sure to use the scan format 'Auto' and not 'Auto (Sensor)'. If the issue persists, recalibrate the scanner.
What to do if the Rowe Scan 600-20 Scanner document is not taken in?
If the document is not taken in, switch the scanner OFF and then ON again. If applicable, execute the Setup Wizard again.
What causes the image to be not composed properly (stitching offset) over entire length of original on my Rowe Scan 600-20, and how to fix it?
If the image is not composed properly (stitching offset) over the entire length of the original, recalibrate the scanner and check the feed path for any obstacles, such as ensuring the glass plate is correctly fitted.
How to improve quality and color reproduction on inkjet printer of my Rowe Scan 600-20 Scanner?
To improve quality and color reproduction on an inkjet printer, calibrate the scanner. Afterwards, establish a new color profile for the printer. Also, make sure that the correct medium is used.
Details on different ROWE Scan 600 models, widths, speeds, and features.
Identification of scanner parts, control panel, and connectivity ports.
Minimum PC hardware requirements and power connection guidelines.
Steps for installing the scanner software, drivers, and plug-ins.
Procedures for connecting the scanner, establishing PC link, and calibrating.
Installing licenses and using external USB drives for saving data.
Locating and operating the scanner's power switch and LEDs.
Step-by-step guide for scanning documents using ScanManager.
Instructions for using the height adjustment feature for thicker originals.
Overview of ScanManager versions, interface, and main functional modules.
Configuring color mode, format, storage, printer, and quality settings.
Managing saved settings (Favorites) and creating advanced print jobs (PrintMaster PRO).
Adjusting global settings and options for ScanManager.
Launching ConfigManager and checking the scanner's operational status.
Managing printers, licenses, and software updates.
Configuring system parameters and managing favorite settings.
Generating and analyzing reports on scanning, printing, and folding jobs.
Administering users, groups, cost centers, and setting limits.
Setting up Cost Control features and handling warnings/errors.
Instructions for cleaning the scanner and replacing the glass plate.
Solutions for common problems during installation and scanning.
Addressing issues with scan quality and automatic width detection.
Specifies the requirement for the Java Runtime Environment.
Important safety information, disclaimers, and installation requirements.
Information on contacting ROWE service for support and inquiries.
To Next Page
General
