Rowe Scan 600-20 - ScanManager Interface and Functions

35
The ROWE ScanManager includes the following components:
1. Functions (depending on the purchased license options not all functions are
available (see Chapter 5.5, Page 35)
2. Toolbar of main viewer (see Chapter 5.9, Page 40)
3. Main viewer to display scans (detailed view, preview); for detailed information,
refer to Chapter 5.6, Page 36
4. Settings (automatically adjusts to the respective function), refer to Chapter 5.11,
Page 43
5. Toolbar editing and measuring functions, refer to Chapter 5.10, Page 41
6. Overview to display complete scan, refer to Chapter 5.7, Page 37
7. Toolbar with keys (refer to Chapter 5.8, Page 38)
5.4 Selection of Language
Should ROWE ScanManager display
information not in the requested language,
press the "Settings“ button left to the
"action keys".
Figure 5.3: Settings button
Press the "Language“ key and select the
requested language.
After having selected the respective
language in the list, the selection is
accepted; however, the new language is
activated only after a restart of
ScanManager.
By pressing "Close“ you return to the main
window.
Figure 5.4: ScanManager - Settings
5.5 Functions
Figure 5.5: Functions ScanManager