2 Installation
In this chapter, you learn how to install the software on a PC to operate the scanner. The
PC shall comply with the minimum requirements mentioned in Chapter 1.5. However, the
optimum requirements indicated there are recommended.
When starting installation, the scanner must neither be connected to power
supply nor PC. Should you use mouse and keyboard on the scanner top, place
the cables in a way that they do not obstruct the paper outlet by using cable
socket and cable ties.
First install the software on the PC. The scanner must be connected only
afterwards.
The scanner is fitted with a grounded three-core power plug. Only skilled
workers are allowed to modify plug and socket. Never bypass or ignore
grounding.
To Next Page
Loading...
